The code of this project can be found here.

For those of you that have found this post before part 1 or that want to refresh what we have done up to this point, here you can catch up with the current state of the project so far. For the rest, we’ll keep going from where we left it. I’ve been really busy lately, so sorry if this second part is not as detailed as the first one.

We left the project in a state where we were able to estimate the homography between our reference surface and a frame that contained that same surface in an arbitrary position. To do so we were using RANSAC. Well, how do we keep building our augmented reality application from there?

## Pose estimation from a plane

What we should achieve to project our 3D models in the frame is, as we have already said, to extend our homography matrix. We have to be able to project not only points contained in the reference surface plane (z-coordinate is 0), which is what we can do now, but any point in the reference space (with a z-coordinate different than 0).

If we go back to the first paragraphs of the section *Homography Estimation*, on part 1, we reached the conclusion that the 3×3 homography matrix was the product of the camera calibration matrix (**A**) by the external calibration matrix – which is an homogeneous transformation-. We dropped the third column (**R3**) of the homogeneous transformation because the z-coordinate of all the points we wanted to map was 0 (since all of them were contained in the reference surface plane). Figure 18 shows again the last steps of how we obtained the final expression of the homography matrix.

This meant that we were left with the equation presented in Figure 19.

However, we now want to project points whose z-coordinate is different than 0, which is what will allow us to project 3D models. To do so we should find a way to compute, from what we know, the value of **R3**. Why? Because once **z** is different than 0 we can no longer drop R3 from the transformation (see Figure 18) since it is needed to map the **z**-value of the point we want to project. The problem of extending our transformation from 2D to 3D will be solved then when we find a way to obtain the value of **R3** (see Figure 18, again). But, how can we get the value of **R3**?

We have already estimated the homography (**H**) , so its value is known. Furthermore, either by looking up the camera parameters or with a bit of common sense, we can easily know or make an educated guess of the values of the camera calibration matrix (**A). **Remember that the camera calibration matrix was:

Here you can find a nice article (part 3 of a recommended series) that talks in detail about the camera calibration matrix and each of its values, and you can even play with them. Since all I am building is a prototype application I just made an educated guess of the values of this matrix. When it comes to the projection of the optical center, I just set **u0** and **v0 **to be half the resolution of the frames I am capturing with OpenCV (**u0**=320 and** v0**=240). As for the focal length, this article provides some useful information on how to estimate the focal length of a webcam or a cellphone camera. I set **fu** and **fv **to the same value, and found that a focal length of 800 worked quite well for me. You may have to adjust these parameters to your actual set up or even go on calibrating your camera.

Now that we have estimates of both the homography matrix **H** and our camera calibration matrix **A, **we can easily recover **R1**, **R2** and **t **by multiplying the inverse of **A **by **H:**

Were the values of **G1**, **G2** and **G3** can be regarded as:

Now, since the external calibration matrix [**R1 R2 R3 t**] is an homogeneous transformation that maps points amongst two different reference frames we can be sure that [**R1 R2 R3**] have to be orthonormal. Hence, theoretically we can compute **R3** as:

Unluckily for us, getting the value of **R3 **is not as simple as that. Since we obtained **G1**,** G2** and **G3 **from estimations of **A** and **H **there is no guarantee that **[R1=G1 R2=G2 R3=G1xG2]** will be orthonormal. The problem is then to get a pair of vectors that are close to** G1** and **G2** (since** G1** and **G2** are estimates of the real values of **R1** and **R2**) and that are orthonormal. Once this pair of vectors has been found (**R1′** and **R2′**) then it will be true that **R3 = R1’xR2′**, so finding the value of **R3** will be trivial. There are many ways in which we can find such a basis, an I will explain on of them. Its main benefit, from my point of view, is that it does not directly include any angle-related computation and that, once you get the hang of it, it is quite straightforward.

Finally and before diving into the explanation, the fact that the vectors we are looking for have to be close to **G1** and **G2 **and not just any orthonormal basis in the same plane as **G1** and **G2 **is important in understanding why some of the next steps are required so make sure you understand it before moving on. I will try my best in explaining the process by which we will get this new basis but if don’t succeed in doing so do not hesitate to tell me and I will try to rephrase the explanation and make it clearer. It will be useful to have at hand Figure 24 since it provides visual information that can help in understanding the process. **Note that what I am calling G1 and G2 are called R1 and R2 respectively in Figure 24**. Let’s go for it!

We start with the reasonable assumption that, since **G1** and **G2** are estimates of the real **R1** and **R2** (which are orthonormal), the angle between **G1** and **G2** will be approximately 90 degrees (in the ideal case it will be exactly 90 degrees). Furthermore, the modulus of each of this vectors will be close to 1. From **G1** and **G2** we can easily compute an orthogonal basis -this meaning that the angle between the basis vectors will **exactly** be 90 degrees- that will be rotated approximately 45 degrees clockwise with respect to the basis formed by **G1** and **G2. **This basis is the one formed by **c=G1+G2** and **d = c x p = (G1+G2) x (G1 x G2) i**n Figure 24. If the vectors that form this new basis (**c**,**d**) are made unit vectors and rotated 45 degrees counterclockwise (note that once the vectors have been transformed into unit vectors – **v / ||v||** – rotating the basis is as easy as **d’ = c / ||c|| + d / ||d|| **and **c’ = c / ||c|| – d / ||d||**), guess what? We will have an orthogonal basis which is pretty close to our original basis (**G1**, **G2)**. If we normalize this rotated basis we will finally get the pair of vectors we were looking for. You can see this whole process on Figure 24.

**R1′, R2′**) has been obtained it is trivial to get the value of

**R3**as the cross product of

**R1′**and

**R2′**. This was tough, but we are all set now to finally obtain the matrix that will allow us to project 3D points into the image. This matrix will be the product of the camera calibration matrix

**A**by

**[R1′ R2′ R3 t]**(where

**t**has been updated as shown in Figure 24). So, finally:

**3D projection matrix = A · [R1′ R2′ R3 t]**

Note that this 3D projection matrix will have to be computed for each new frame. With numpy we can, in a few lines of code, define a function that computes it for us:

def projection_matrix(camera_parameters, homography): """ From the camera calibration matrix and the estimated homography compute the 3D projection matrix """ # Compute rotation along the x and y axis as well as the translation homography = homography * (-1) rot_and_transl = np.dot(np.linalg.inv(camera_parameters), homography) col_1 = rot_and_transl[:, 0] col_2 = rot_and_transl[:, 1] col_3 = rot_and_transl[:, 2] # normalise vectors l = math.sqrt(np.linalg.norm(col_1, 2) * np.linalg.norm(col_2, 2)) rot_1 = col_1 / l rot_2 = col_2 / l translation = col_3 / l # compute the orthonormal basis c = rot_1 + rot_2 p = np.cross(rot_1, rot_2) d = np.cross(c, p) rot_1 = np.dot(c / np.linalg.norm(c, 2) + d / np.linalg.norm(d, 2), 1 / math.sqrt(2)) rot_2 = np.dot(c / np.linalg.norm(c, 2) - d / np.linalg.norm(d, 2), 1 / math.sqrt(2)) rot_3 = np.cross(rot_1, rot_2) # finally, compute the 3D projection matrix from the model to the current frame projection = np.stack((rot_1, rot_2, rot_3, translation)).T return np.dot(camera_parameters, projection)

Note that the sign of the homography matrix is changed in the first line of the function. I will let you think why this is required.

As a summary, let me shortly recap our thought process to estimate the 3D matrix projection.

- Derive the mathematical model of the projection (image formation). Conclude that, at this point, everything is an unknown.
- Heuristically estimate the homography via keypoint matching and RANSAC. ->
**H**is no longer unknown. - Estimate the camera calibration matrix. ->
**A**is no longer unknown. - From the estimations of the homography and the camera calibration matrix along with the mathematical model derived in 1, compute the values of
**G1, G2**and**t**. - Find an orthonormal basis in the plane (
**R1′, R2′**) that is similar to (**G1,G2**), compute**R3**from it and update the value of**t**.

## Model projection

We are now reaching the final stages of the project. We already have all the required tools needed to project our 3D models. The only thing we have to do now is get some 3D figures and project them!

I am currently only using simple models in Wavefront .obj format. Why OBJ format? Because I found them easy to process and render directly with bare Python without having to make use of other libraries such as OpenGL. The problem with complex models is that the amount of processing they require is way more than what my computer can handle. Since I want my application to be real-time, this limits the complexity of the models I am able to render.

I downloaded several (low poly) 3D models format from clara.io such as this fox. Quoting Wikipedia, *a .obj file is a geometry definition file format*. If you download it and open the .obj file with your favorite text editor you will get an idea on how the model’s geometry is stored. And if you want to know more, Wikipedia has a nice in-detail explanation.

The code I used to load the models is based on this OBJFileLoader script that I found on Pygame’s website. I stripped out any references to OpenGL and left only the code that loads the geometry of the model. Once the model is loaded we just have to implement a function that reads this data and projects it on top of the video frame with the projection matrix we obtained in the previous section. To do so we take every point used to define the model and multiply it by the projection matrix. One this has been done, we only have to fill with color the faces of the model. The following function can be used to do so:

def render(img, obj, projection, model, color=False): vertices = obj.vertices scale_matrix = np.eye(3) * 3 h, w = model.shape for face in obj.faces: face_vertices = face[0] points = np.array([vertices[vertex - 1] for vertex in face_vertices]) points = np.dot(points, scale_matrix) # render model in the middle of the reference surface. To do so, # model points must be displaced points = np.array([[p[0] + w / 2, p[1] + h / 2, p[2]] for p in points]) dst = cv2.perspectiveTransform(points.reshape(-1, 1, 3), projection) imgpts = np.int32(dst) if color is False: cv2.fillConvexPoly(img, imgpts, (137, 27, 211)) else: color = hex_to_rgb(face[-1]) color = color[::-1] # reverse cv2.fillConvexPoly(img, imgpts, color) return img

There are two things to be highlighted from the previous function:

- The scale factor: Since we don’t know the actual size of the model with respect to the rest of the frame, we may have to scale it (manually for now) so that it haves the desired size. The scale matrix allows us to resize the model.
- I like the model to be rendered on the middle of the reference surface frame. However, the reference frame of the models is located at the center of the model. This means that if we project directly the points of the OBJ model in the video frame our model will be rendered on one corner of the reference surface. To locate the model in the middle of the reference surface we have to, before projecting the points on the video frame, displace the x and y coordinates of all the model points by half the width and height of the reference surface.
- There is an optional color parameter than can be set to True. This is because some models also have color information that can be used to color the different faces of the model. I didn’t test it enough and setting it to True might result in some problems. It is not 100% guaranteed this feature will work.

And that’s all!

## Results

Here you can find some links to videos that showcase the current results. As always, there are many things that can be improved but overall we got it working quite well.

## Final notes

Especially for Linux users, make sure that your OpenCV installation has been compiled with FFMPEG support. Otherwise, capturing video will fail. Pre-built OpenCV packages such as the ones downloaded via pip are not compiled with FFMPEG support, which means that you will have to build it manually.

As usual, you can find the code of this project on GitHub. I would have liked to polish it a bit more and add a few more functionalities, but this will have to wait. I hope the current state of the code is enough to get you started.

The might not work directly as-is (you should change the model, tweak some parameters, etc.), but with some tinkering you can surely make it work! I’ll try to help in any issues you find along the way!

Pingback: Augmented reality with Python and OpenCV (part 1) | Bites of code

Pingback: Augmented actuality with Python and OpenCV (section 2) – Python | Automate Python

PeterSo why is homography inverted? And my 3d object shakes too much, dunno why.

LikeLike

PeterProbably it has something to do with pinhole camera.

LikeLike

Tomasz PosłusznyIt is because there is always noise on camera image. You can try applying some temporal smoothing of feature points, maybe using some simple form of movement detection on images – i. e. try to determine if feature point on one frame remained in same place (no movement) in the next frame. This possibly will remove shaking, when image is static.

LikeLike

GerardoHello, I tell you that the image is not fixed on the sheet that contains the pattern model.jpg which I have already modified, keeping the name of the file, in fact appears and disappears in the entire field of view of the camera.

What could be the problem?

regards

LikeLiked by 1 person

hoseinhi my pycharm gives error:

NameError: name ‘camera_parameters’ is not defined

in this line: rot_and_transl = np.dot(np.linalg.inv(camera_parameters), homography)

LikeLike

juangallostraPost authorHi hosein,

camera_parameters should be passed as an argument of the function projection_matrix, as it can be seen here: https://github.com/juangallostra/augmented-reality/blob/19a49c47982df9009c7f6ec06a0eb3613050562b/src/ar_main.py#L124

If you are using the code as-is from GitHub, this shouldn’t be a problem as the call to projection_matrix inside the main function (https://github.com/juangallostra/augmented-reality/blob/19a49c47982df9009c7f6ec06a0eb3613050562b/src/ar_main.py#L77) gets the value of camera_parameters from https://github.com/juangallostra/augmented-reality/blob/19a49c47982df9009c7f6ec06a0eb3613050562b/src/ar_main.py#L29

Have you modified the code?

LikeLike

hoseinhi Thanks a lot. That Solved , Now I Downloaded BINVOX_RW software (module) related to OBJ files, but pycharm gives this error:

raise IOError(‘Not a binvox file’)

OSError: Not a binvox file

when i wrote these codes from https://github.com/dimatura/binvox-rw-py

import binvox_rw

with open(‘fox.obj’, ‘rb’) as f:

model = binvox_rw.read_as_3d_array(f)

LikeLike

hoseinhi Please Upload your 3d scene that you used in this article.

LikeLike

hoseinhi when i wrote these codes:

def render(model, fox1, projection, cap, color=False):

vertices = fox1.vertices

scale_matrix = np.eye(3) * 3

h, w = model.shape

for face in fox.faces:

pycharm gave below error:

AttributeError: ‘Voxels’ object has no attribute ‘faces’

LikeLike

hoseinhi i used Pywavefront library for import OBJ file ‘fox.obj’ as below codes:

import pywavefront

import pywavefront.visualization

from pywavefront import visualization

from pywavefront import material

from pywavefront import mesh

from pywavefront import parser

import pywavefront.texture as texture

fox = pywavefront.Wavefront(‘low-poly-fox-by-pixelmannen.obj’, collect_faces=True)

but after run, pycharm shows ONLY a BLANK WHITE SCREEN AND MY COMPUTER CRASH SEVERELY.and says this ambiguous ERROR:

Unimplemented OBJ format Statement ‘s’ on line ‘s 1’

please help me as soon as , even I asked my Big Problem from Opencv Forum and Stackoverflow, but it seems Nobody dont know anything about my Problem and Nobody had not This white screen and its ERROR in his/her coding in last.

LikeLike

KurtCan you share the “fox.obj” file?

That line means the PyWavefront parser found a line “s 1” in your “fox.obj” file, and doesn’t know what to do with it.

You can also open an issue directly on the project, and attach the “fox.obj” file there: https://github.com/pywavefront/PyWavefront/issues

LikeLike

hoseinhi thanks, Now I used Pygame and openGL for display and Rendering Fox Model that pycharm Shows JUST Black Screen (Blank Pygame window), i have Rendering Problem, because my codes are irregular and i am very confused.

LikeLike

Arshita GuptaHi.

Thanks for putting up such a detailed explanation/tutorial.

However, I have a question regarding Figure. 24.

(This question might be a little silly due to my inability in understanding the math behind this.)

While calculating the orthonormal basis, why do we consider a rotation of 45 degree? Is that a fundamental property to keep in mind while calculating orthonormal basis?

Also, is there any research paper (or any other source) that you referred to while solving this problem (problem being: calculating extrinsic camera parameters for 3D object rendering) ?

LikeLike

juangallostraPost authorHi Arshita Gupta,

I’m glad you like the post, thanks! Re your question, the rotation of approx. 45 degrees is a consequence of the method used to calculate the orthonormal basis {R1′, R2′, R3′}. Following the notation from Figure 24, the basis that is rotated 45 degrees with respect to {R1, R2} is the basis {c, d, p}. This is because R1 and R2 are two unit vectors which are approx 90 degrees apart, which means that c (=R1+R2) will be approx 45 degrees apart from both R1 and R2, and hence the whole basis {c, d, p} will be approx 45 degrees apart from {R1, R2} (it is important to note here that this is because R1 and R2 are unit vectors). I’m not sure I have explained myself here, so feel free to follow up with any questions.

In response to your second question, I think I took bits from here and there while I was taking a course that covered the topic, so the notes of the course were also helpful. However, I can’t remember any specific reference now. If anything comes to my mind I will let you know.

LikeLike

Arshita GuptaThanks for your quick reply. Yeah.. I think it makes sense.

LikeLike

Anh Tuấn Đặng Nguyễnhello can i ask a question, why my project didn’t show 3D obj. The code worked fine for every thing but not displayed 3D obj on the target area

LikeLike